FREE CCNP LAB

Dedicated to helping you pass the CCNP exams

Home
CCNP
GNS3
Other
Routing
- BGP
- EIGRP
- OSPF
- RIP
Security
Switching
- EtherChannel
- STP
- VLAN
- VTP
VPN

Log In

Username
Password

	Remember Me Lost your password? Register

Resources
Blogroll
- Cisco Labs

GNS3 Lab Configuring ASA Site-To-Site VPN

Posted by barry on December 8th, 2014

The purpose of this lab is to provide a more advanced understanding of Cisco’s ASA 5520 Adaptive Security Appliance; The Cisco ASA is a security device that combines firewall, antivirus, intrusion prevention, and virtual private network (VPN) capabilities. In this lab we will use GNS3 to learn how to configure the ASA as a basic Firewall with the addition of a third zone referred to as a DMZ and finally we will create a site-to-site VPN between the sites. This knowledge is essential to passing the CCNP Security exam and will be used in daily in your position as a Cisco network engineer. Continue reading “GNS3 Lab Configuring ASA Site-To-Site VPN” »

GNS3 Lab Configuring ASA Using ASDM

Posted by barry on October 9th, 2014

The purpose of this lab is to provide a more advanced understanding of Cisco’s ASA 5520 Adaptive Security Appliance; The Cisco ASA is a security device that combines firewall, antivirus, intrusion prevention, and virtual private network (VPN) capabilities. In this lab we will Packet Tracer 6.1 to learn how to configure the ASA as a basic Firewall with the addition of a third zone referred to as a DMZ. This knowledge is essential to passing the CCNA Security exam and will be used in daily in your position as a Cisco network engineer. Continue reading “GNS3 Lab Configuring ASA Using ASDM” »

CCNP EIGRP GNS3 Lab-1

Posted by barry on April 25th, 2014

The purpose of this CCNP GNS3 lab is to gain a better understand of how to configure EIGRP on Cisco IOS routers in multiple autonomous system. In this lab we will use GNS3 to model a simple lab to demonstrate how to configure and verify EIGRP in a multiple autonomous system implementation. Additionally we will learn path control and route summarization. Continue reading “CCNP EIGRP GNS3 Lab-1” »

New CCNP IOS Requirments for GNS3

Posted by barry on March 31st, 2014

If you are considering using GNS3 for your CCNA or CCNP labs but are reluctant to do so as you have heard that it requires an official Cisco IOS copy this article is worth reading. First GNS3 will require an Official Cisco IOS but there are a number of ways that you can obtain a copy. You can of course purchase a copy from Cisco or you can purchase a used router such as a 2610 and copy the IOS from it and finally if you are a Internet savvy person you can find one online and download it free. Continue reading “New CCNP IOS Requirments for GNS3” »