Free CCNP GNS3 Lab Advanced OSPF in Multiple Areas

In this Free CCNA Lab you will learn to configure OSPF in multiple areas. You will configure OSPF over a Frame-Relay WAN as well as over two other Frame-Relay connections. You will also you will learn to configure OSPF on a multi-access network. You will also learn to use the OSPF election process to determine the designated router (DR), backup designated router (BDR), and DRother states. Finally you will learn to configure OSPF virtual link to connect two discontigous areas.

This Lab has been formatted for GNS3 but I have included a packet tracer topology as well. I have included the basic router configurations with the IP address and DLCI frame-Relay configuration. The final solution is up to you to provide.

Learning Objectives:

  • Upon completion of this lab, you will be able to:
  • Perform basic configuration tasks on a router.
  • Configure and activate interfaces.
  • Configure OSPF routing on all routers.
  • Configure OSPF router IDs.
  • Verify OSPF routing using show commands.
  • Configure a static default route.
  • Propagate default route to OSPF neighbors.
  • Configure OSPF Hello and Dead Timers.
  • Configure OSPF on a Multi-access network.
  • Configure OSPF priority.
  • Understand the OSPF election process.
  • Document the OSPF configuration.

Download this lab now:

  OSPF-MultiArea-Lab (118.4 KiB, 3,456 hits)

Bookmark and Share
You can leave a response, or trackback from your own site.

2 Responses to “Free CCNP GNS3 Lab Advanced OSPF in Multiple Areas”

  1. latif says:

    i like this website

  2. mrityunjaykumar says:


Leave a Reply

What is 15 + 9 ?
Please leave these two fields as-is:
IMPORTANT! To be able to proceed, you need to solve the following simple math (so we know that you are a human) :-)


Powered by WordPress | Designed by: backlinks | Thanks to internet marketing, etiketten drucken and index backlink