Placed

Archive for the ‘Routing’ Category

CCNP EIGRP GNS3 Lab-1

The purpose of this CCNP GNS3 lab is to gain a better understand of how to configure EIGRP on Cisco IOS routers in multiple autonomous system. In this lab we will use GNS3 to model a simple lab to demonstrate how to configure and verify EIGRP in a multiple autonomous system implementation. Additionally we will […]

New CCNP IOS Requirments for GNS3

If you are considering using GNS3 for your CCNA or CCNP labs but are reluctant to do so as you have heard that it requires an official Cisco IOS copy this article is worth reading. First GNS3 will require an Official Cisco IOS but there are a number of ways that you can obtain a […]

CCNP EIGRP GNS3 Lab-3 Split Horizon

The purpose of this CCNP GNS3 lab is to gain a better understand of how to configure EIGRP over frame-relay in a hub and spoke configuration on Cisco IOS routers. In this lab we will use GNS3 to model a simple lab to demonstrate how to configure and verify EIGRP using the split horizon rule […]

CCNP EIGRP GNS3 Lab-2 Stub Routing

The purpose of this CCNP GNS3 lab is to gain a better understand of how to configure EIGRP Stub Routing on Cisco IOS routers. In this lab we will use GNS3 to model a simple lab to demonstrate how to configure and verify EIGRP Stub implementation. Additionally we will learn to configure Key-Chain authentication.

Powered by WordPress | Designed by: backlinks | Thanks to internet marketing, etiketten drucken and index backlink