Placed

what to do lose weight

Archive for the ‘OSPF’ Category

Free CCNP GNS3 BGP Lab-3

In this free CCNP GNS3 lab we will be exploring BGP confederation as well as some filtering using prefix-list and route-map.  In this lab the company, AS 65505 consisting of two routers running BGP in the core, and is connected to 2 ISP’s – AS65501 and AS6504. Each router has a loopback which will be […]

Free CCNP GNS3 Lab OSPF in a Single Area

You are responsible for configuring the new network to connect your company’s engineering, marketing, and accounting departments, represented by the loopback interfaces on each of the three routers. The physical devices have just been installed and connected by Fast Ethernet and serial cables. Configure OSPF to allow full connectivity between all departments. 

Free CCNP GNS3 Lab Advanced Redistribution

In this Free CCNP Lab GNS3 scenario you will configure five routers in four different autonomous systems using two dynamic routing protocols OSPF and EIGRP. The completed design goal is to insure full IP connectivity to all interfaces. You will use Ping and show commands to verify the configuration and connectivity of the network.

Free CCNP GNS3 Lab Redistribution EIGRP to OSPF

In this lab we will learn to redistribute EIGRP into OSPF and vice versa. This lab is configured use three routers R1, 2, and 3 as shown in the included network diagram. EIGRP is configured on R1 and 2 OSPF is also configured on R2 as well as R3 as OSPF Area 0. OSPF Area […]

Powered by WordPress | Designed by: backlinks | Thanks to internet marketing, etiketten drucken and index backlink