Placed

what to do lose weight

Archive for the ‘OSPF’ Category

Free CCNP GNS3 Lab Advanced OSPF in Multiple Areas

In this Free CCNA Lab you will learn to configure OSPF in multiple areas. You will configure OSPF over a Frame-Relay WAN as well as over two other Frame-Relay connections. You will also you will learn to configure OSPF on a multi-access network. You will also learn to use the OSPF election process to determine […]

Free CCNP GNS3 Lab Configuring OSPF in Multiple Areas

This Free CCNP Lab scenario is configured using GNS3 and contains four routers, routers R1 and R2 form OSPF Area-1 and routers R3 and R4 form the backbone OSPF Area-0. The link between router R2 and R4 form OSPF Area-2; this is a virtual┬álink and is used to connect the discontiguous Area-1 to the backbone […]

Free CCNA GNS3 Lab Configuring OSPF in a Single Area

In this Free CCNP Lab you will configure OSPF routing on two Cisco 3660 routers using a class B network address of 131.108.0.0 subneted with a class C subnet mask of 255.255.255.0. . You will also configure a number of loopback interfaces to populate the routing table. I have included an un-configured GNS3 topology and […]

Basic OSPF Configuration GNS3 Lab

In this lab I’ll show you how to configure a simple multi area OSPF network using four routers. As per the network diagram we will have 3 OSPF areas, our backbone area 0, and area’s 10 and 20. Routers R1 and R2 are both known as an Area Border Router’s (ABR) because they are both […]

Powered by WordPress | Designed by: backlinks | Thanks to internet marketing, etiketten drucken and index backlink