Placed

Posts Tagged ‘EIGRP’

EIGRP ODR Multi-Technology

Overview: In this Free CCNP Lab we will learn to understand EIGRP implementation and configuration of EIGRP and ODR in Cisco IOS routers. We will also learn redistribution and path control. In addition, we will then learn to verify and test our implementation of these technologies.

Free CCNP GNS3 Lab Advanced Redistribution

In this Free CCNP Lab GNS3 scenario you will configure five routers in four different autonomous systems using two dynamic routing protocols OSPF and EIGRP. The completed design goal is to insure full IP connectivity to all interfaces. You will use Ping and show commands to verify the configuration and connectivity of the network.

Free CCNP GNS3 Lab Redistribution EIGRP to OSPF

In this lab we will learn to redistribute EIGRP into OSPF and vice versa. This lab is configured use three routers R1, 2, and 3 as shown in the included network diagram. EIGRP is configured on R1 and 2 OSPF is also configured on R2 as well as R3 as OSPF Area 0. OSPF Area […]

EIGRP Troubleshooting GNS3 Lab

The following EIGRP troubleshooting lab was kindly shared by one of my Linkedin contacts Thomas. I always welcome any labs that you may wish to share and will gladly give you credit in the post for creating them. For this shared lab I have created a topology drawing of the network so that you will […]

Powered by WordPress | Designed by: backlinks | Thanks to internet marketing, etiketten drucken and index backlink