Posts Tagged ‘RIP’

Basic EIGRP Configuration GNS3 Lab

This lab scenario covers basic EIGRP; you will configure the EIGRP routing process over 5 routers using Ethernet and Serial links. You will also use various commands to verify the configuration and check connectivity. This lab scenario has been created as a Cisco as a GNS3 Lab but can be completed using Cisco Packet Tracer […]

Basic EIGRP Troubleshooting GNS3 Lab

In this Free CCNP Lab we will learn to do basic troubleshooting of EIGRP using the preconfigured GNS3 Scenario included in the download. This scenario has 4 routers connected via Frame-Relay in a hub and spoke topology using sub-interfaces. You will use commands lake show ip interfaces, show frame-relay pvc, show ip eigrp neighbors, and […]

Welcome to Free CCNP Lab

Welcome to Free CCNA Lab. This site is dedicated to providing practice Cisco lab scenarios to help you pass the CCNP exams. We will be adding new lab each week covering routing, and switching. These labs will include RIP, IGRP, EIGRP, and BGP routing protocol and VTP, VLAN, STP, Ether Channel for switching. All this […]

Powered by WordPress | Designed by: backlinks | Thanks to internet marketing, etiketten drucken and index backlink