So far most of the labs provided on this site have been geared to preparing you for the CCNP routing and switching exams. These exams certify you have a complete understanding of routing and switching technologies, although to be certified as a CCNP you still need to pass the Troubleshooting and Maintaining Cisco IP Networks […]
Posted in CCNP, GNS3, Routing, Switching 
Tags: CCNP, Cisco, GNS3, Lab, Routing, Scenario, Switching, Trouble Tickets, Troubleshooting 
1 Comment »
In this Free CCNP Lab you will create a multihomed ISP connectivity solution and contracted with two ISPs for Internet connectivity with fault tolerance. Because you are connecting to two different service providers, you must configure BGP, which runs between the boundary router and the two ISP routers.
Posted in BGP, Routing Tags: BGP, BGP Neighbor, CCIE, CCNP, Cisco, GNS3, Lab, Multihomed, Routing, Scenario, Switching No Comments »
On most Cisco switches it is possible to create logical connections that are made-up off different physical interface. It is required that these interfaces share the same speed. Most Cisco switches support a maximum of 64 EtherChannels. These interfaces do not need to be contiguous, or even within the same module. Each channel must be […]
Posted in EtherChannel, Switching Tags: CCNP, Cisco, EtherChannel, Lab, LACP, Packet Tracer, PAgP, PortChannel, Scenario, Switching, VLAN 5 Comments »
EtherChannel is a port link aggregation technology or port-channel architecture that allows grouping of several physical Ethernet links to create one logical Ethernet link for the purpose of providing fault-tolerance and high-speed links between switches. An EtherChannel can be created from between two to eight active Fast, Gigabit Ethernet ports; with an additional one to eight inactive (failover) […]
Posted in EtherChannel, Switching, VLAN, VTP Tags: CCNP, Cisco, DTP, EtherChannel, Lab, Packet Tracer, Scenario, STP, Switching, VLAN, VTP No Comments »
